Influência do tratamento de superfície na adesão de cerâmicas vítreas
DOI:
https://doi.org/10.36557/2674-8169.2024v6n8p3238-3251Keywords:
Cerâmicas, CimentaçãoAbstract
The long-term success of all-ceramic restorations depends on the adhesion between the ceramic material and the tooth structure, and the correct selection of surface treatment is of paramount importance. Objective: A literature review was carried out to evaluate the best treatment protocol for the surface of glass ceramics, in order to provide adequate prosthetic adhesion of the restorative material. Methodology: For this, scientific articles available in the PubMed database were used, using the following descriptors “Ceramics”, “Cementation”, “Surface” and “Treatment”. Results: The ceramic-cement-tooth connection will be subject to a complex environment in the oral cavity, being influenced by several extrinsic factors, such as temperature changes, saliva, daily intake of food and drink, bite force and other habits. To achieve good adhesion quality, it is important to consider the type of ceramic, the surface characteristics and the desired mechanical properties, in order to choose the best etching protocol. Conclusion: It was concluded that the surface treatment with hydrofluoric acid and silane is still considered the gold standard for glass ceramics, however, the self-etching ceramic primer shows promising results.
Downloads
References
ATAOL, A. S.; ERGUN, G. Effects of surface treatments on repair bond strength of a new CAD/CAM ZLS glass ceramic and two different types of CAD/CAM ceramics. Journal of Oral Science, v. 60, n. 2, p. 201-211, 2018.
AZEVEDO, V. L. B. et al. Surface treatments on CAD/CAM glass-ceramics: Influence on roughness, topography, and bond strength. J Esthet Restor Dent., v. 33, n. 5, p. 739-749, 2021.
BAJRAKTAROVA-VALJAKOVA, E. et al. Acid Etching as Surface Treatment Method for Luting of Glass-Ceramic Restorations, part 1: Acids, Application Protocol and Etching Effectiveness. Open Access Maced J Med Sci., v. 6, n. 3, p. 568-573, 2018.
BARCHETTA, N. F. et al. Strength of a Zirconia-Reinforced Lithium Silicate Ceramic: Acid-Etching Time and Resin Cement Application Effects. The International Journal of Periodontics & Restorative Dentistry, v. 39, n. 3, p. 431-437, 2019.
BOMICKE, W. et al. The Effects of Surface Conditioning and Aging on the Bond Strength Between Composite Cement and Zirconia-Reinforced Lithium-Silicate Glass-Ceramics. The Journal of Adhesive Dentistry, v. 21, n. 6, p. 567-576, 2019.
BORGES, G. A. et al. Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics. The journal of prosthetic dentistry, v. 89, n. 5, p. 479-488, 2003.
COLOMBO, L. A.; MURILLO-GÓMEZ, F.; de GOES, M. F. Bond Strength of CAD/CAM Restorative Materials Treated with Different Surface Etching Protocols. The Journal of Adhesive Dentistry, v. 21, n. 4, p. 307-317, 2019.
DONMEZ, M. B.; Okutan, Y.; Yucel, M. T. Effect of prolonged application of single-step self-etching primer and hydrofluoric acid on the surface roughness and shear bond strength of CAD/CAM materials. Eur J Oral Sci, v. 128, n. 6, p. 542-549, 2020.
EL-DAMANHOURY, H. M.; GAINTANTZOPOULOU, M. D. Self-etching ceramic primer versus hydrofluoric acid etching: Etching efficacy and bonding performance. J Prosthodont Res, v. 62, n. 1, p. 75-83, 2017.
FONZAR, R. F. et al. Influence of Acid Concentration and Etching Time on Composite Cement Adhesion to Lithium-Silicate Glass Ceramics. The Journal of Adhesive Dentistry, v. 22, n. 2, p. 175-182, 2020.
KALAVACHARLA, V. K. et al. Influence of Etching Protocol and Silane Treatment with a Universal Adhesive on Lithium Disilicate Bond Strength. Operative Dentistry, v. 40, n. 4, p. 372-378, 2015.
LIMA, C. M. et al. Effect of different surface treatments on the biaxial flexure strength, Weibull characteristics, Roughness, and surface topography of bonded CAD/CAM silica-based ceramics. Dent Mater, v. 37, n. 3, p. 151-161, 2020.
LISE, D. P. et al. Microshear Bond Strength of Resin Cements to Lithium Disilicate Substrates as a Function of Surface Preparation. Oper Dent., v. 40, n. 5, p. 524-537, 2015.
MARUO, Y. et al. Does acid etching morphologically and chemically affect lithium disilicate glass ceramic surfaces? J Appl Biomater Funct Mater, v. 15, n. 1, p. 93-100, 2017.
MENEES, T. S. et al. Influence of particle abrasion or hydrofluoric acid etching on lithium disilicate flexural strength. J Prosthet Dent, v. 112, n. 5, p. 1164-1170, 2014.
MONTEIRO, J. B. et al. Fatigue failure load of zirconia-reinforced lithium silicate glass ceramic cemented to a dentin analogue: effect of etching time and hydrofluoric acid concentration. Journal of the Mechanical Behavior of Biomedical Materials, v. 77, p. 375-382, 2017.
MURILLO-GÓMEZ, F.; de GOES, M. F. Bonding effectiveness of tooth-colored materials to resin cement provided by self-etching silane primer after short- and long-term storage. J Prosthet Dent, v. 121, n. 4, p. 713-720, 2019.
MURILLO-GÓMEZ, F.; PALMA-DIBB, R. G.; de GOES, M. F. Effect of acid etching on tridimensional microstructure of etchable CAD/CAM materials. Dent Mater, v. 34, n. 6, p. 944-955, 2018.
OZCAN, M.; ALLAHBEICKARAGHI, A.; DUNDAR, M. Possible hazardous effects of hydrofluoric acid and recommendations for treatment approach: a review. Clin Oral Investig, v. 16, n. 1, p. 15-23, 2012.
PRADO, M. et al. Ceramic Surface Treatment with a Single-component Primer: Resin Adhesion to Glass Ceramics. J Adhes Dent., v. 20, n. 2, p. 99-105, 2018.
PUPPIN-RONTANI, J. et al. Effect of Hydrofluoric Acid Concentration and Etching Time on Bond Strength to Lithium Disilicate Glass Ceramic. Oper Dent., v. 42, n. 6, p. 606-615, 2017.
PROCHNOW, C. et al. How does hydrofluoric acid etching affect the cyclic load-to-failure of lithium disilicate restorations? J Mech Behav Biomed Mater, v. 87, p. 306-311, 2018.
SATO, T. P. et al. Effects of Surface Treatments on the Bond Strength Between Resin Cement and a New Zirconia-Reinforced Lithium Silicate Ceramic. Oper Dent., v. 41, n. 3, p. 284-292, 2016.
STRASSER, T. et al. Roughness, surface energy, and superficial damages of CAD/CAM materials after surface treatment. Clin Oral Investig., v. 22, n. 8, p. 2787-2797, 2018.
SIQUEIRA, F. S. F. D. et al. Effect of self-etching primer associated to hydrofluoric acid or silane on bonding to lithium disilicate. Brazilian Dental Journal, v. 30, p. 171-178, 2019.
SOUZA, R. O. A. et al. Two-year Follow-up of Ceramic Veneers and a Full Crown Treated With Self-etching Ceramic Primer: A Case Report. Oper Dent., v. 45, n. 4, p. 352-358, jul. 2020.
SUDRÉ, J. P. et al. Influence of Surface Treatment of Lithium Disilicate on Roughness and Bond Strength. Int J Prosthodont., v. 33, n.2, p. 212-216, mar./abril 2020.
TIAN, T. et al. Aspects of bonding between resin luting cements and glass ceramic materials. Dent Mater., v.30, n.7, p. 147-162, jul. 2014.
TRIBST, J. P. M. et al. Fatigue Failure Load of Resin-bonded Simplified Lithium Disilicate Glass-Ceramic Restorations: Effect of Ceramic Conditioning Methods. J Adhes Dent., v. 21, n. 4, p. 373-381, 2019.
VENTURINI, A. B. et al. Fatigue failure load of feldspathic ceramic crowns after hydrofluoric acid etching at different concentrations. J Prosthet Dent., v.119, n.2, p. 278-285, fev. 2017.
WILLE, S.; LEHMANN, F.; KERN, M. Durability of Resin Bonding to Lithium Disilicate and Zirconia Ceramic using a Self-etching Primer. J Adhes Dent., v.19, n.6, p. 491- 496, 2017.
YU, P.; WANG, X. Y. Effects of Surface Treatment Procedures on Bond Strength of Lithium Disilicate Glass Ceramic. Chin J Dent Res., v. 24, n. 2, p. 119-124, jun.
ZOGHEIB, L. V. et al. Effect of Hydrofluoric Acid Etching Duration on the Roughness and Flexural Strength of a Lithium Disilicate-Based Glass Ceramic. Braz Dent., v. 22, n. 11, p. 45-50, 2011.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Larissa Costa Freitas, Fabíola Pessôa Pereira Leite, Clarice de Araújo Oliveira
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors are copyright holders under a CCBY 4.0 license.
